|
|
Build Your Online Product Catalogs?
| Product Name: |
ANSI Y Strainer for Water Oil
|
| Supply Ability: |
|
| Related proudcts |
y strainer, industrial strainer, |
| Specifications |
1/2 |
| Price Term: |
FOB |
| Port of loading: |
Ningbo |
| Minimum Order |
5 |
| Unit Price: |
Negotiable |
|
Product Introduction
The KSRY14G ANSI strainer is an indispensable device in the pipeline system. The structure and flange holes standard are according to ANSI. It is usually installed at the inlet end of the equipment to filter particulate impurities in the medium and protect the valves or other equipment. KMO's products have the characteristics of advanced structure, low resistance, and convenient drainage. The connection way is flange connection and thread screw connection. The applicable medium of the product is water, oil, gas and corrosive medium. (oxygen is separate) The filter can be made according to user¡¯s requirements. The internal parts are made of stainless steel, which is durable. The mesh of the filter can be set according to customer needs. Generally speaking, the mesh of water strainer is 18~30 meshes. The mesh of the gas strainer is 40~700 meshes, and the mesh of the oil strainer is 100~480 meshes.
Body Material: WCB(more ***ails please check the follow drawing)
Applicable medium: water, oil,
Diameter: 1/2"-24"
Nominal Pressure: 150LB~600LB
Design temperature:-29oC~ +350oC
Connection type: flange
Filter meshes: 40 meshes or customer requirements
Design Standard: SH/T3411
Structure and flange standard: ANSI B16.10
Product Selection Principles
Entry and exit path: in principle, the inlet and outlet diameter of the strainer should be same as the inlet pipe diameter.
Nominal pressure£ºthe pressure level of the strainer is according to the highest pressure that may appear in the filter line.
The choice of the number of holes: mainly consider the particle size of impurities to be intercepted, which depends on the process requirements of the medium process. (check the filter specifications for the particle size that the net can intercept)
Material: KMO recommends that the body material is generally selected to be the same as the material of the connected process pipeline or the performance is higher than the pipeline material. |
| Company: |
WENZHOU KMO FLUID EQUIEPMENT CO,.LTD
|
| Contact: |
Ms. Miranda Chen |
| Address: |
Wenzhou Yongjia Dong'ou Fort Street, Industrial Zone |
| Postcode: |
315200 |
| Tel: |
8618057776809 |
| Fax: |
|
| E-mail: |
|
|
|
|
Home
